X4+ Z-axis gibb adjusting screw

[Mac Tech]

I bent the adjusting screw on my X4+. Does anyone know if the Z-axis gibb adjusting screw on the X4+ is the same as the adjusting screw on the Grizzly SX3 mill (G0619)?

Syil America does not have them (they did tell me they could have one shipped from China... IN 90 DAYS).

Grizzly sells the one for their SX3 for $2 (Shipping will cost me $7 )

[Mac Tech]

Ok, so since no one chimed in on this and Syil America didn't know , I ordered one of the screws. Its the same adjusting screw that's on the X4+ mill.

It's part 77 with a Grizzly P#P0619077. Cost ya $2

http://www.grizzly.com/products/G0619/parts/1