I recently received an X6 from Syil and have been working on getting it running with Mach3. I have no previous experience with Mach3. Syil sent me a .xml file for the X6 to run in Mach3. I have loaded the .xml file, connected the X6 to the computer via parallel port, and loaded Mach3. I had to change a few settings, but the machine is now in motion. I'll have pictures and updates for everyone shortly.
I am used to working with much larger machines in which the control is built in, so this should be fun!
Last edited by ShineMachineCo.; 07-22-2009 at 04:45 PM.