Need CAD drawing of SX3 drawbar

[idtkid]

My used SX3 that I purchased did not come with a drawbar for the MT3 spindle. If someone has a MT3 drawbar for the SX3 can you quickly create a CAD drawing or photo with notations so that I can have one made? I would greatly appreciate it!

[PEU]

Its just a rod threaded to match your MT3 tool and on the other side some way to allow to keep it firmly in place, here I made a quick drawing in solidworks, from memory, on how mine is done, I had the one that came with the machine and an extra one for a different thread pitch toolholder.
To put it simple, its just a long screw with a large washer on top




Pablo

[idtkid]

thank you very much! so just a piece of all thread with a washer and a few nuts on top would work?

[PEU]

Depending on the quality of the threaded rod you use I see no problems, mine is like the drawing, just threaded at the end.


Pablo