SYIL X4+ LCD DISPLAY

[gio1976]

hi people:

sir, i would like to seek your advice regarding the syil x4 plus we purchased not more than a year ago. the LCD display of the machine does not display any characters anymore. as if the lcd has no power. the machine is still working with mach3 but we cannot use the mill on manual. we checked the wires and cables inside the panel and all are good.

we were wondering if this is still included in your warranty period. if so, what shall we do.

thanks.

[syil]

hi people:

sir, i would like to seek your advice regarding the syil x4 plus we purchased not more than a year ago. the LCD display of the machine does not display any characters anymore. as if the lcd has no power. the machine is still working with mach3 but we cannot use the mill on manual. we checked the wires and cables inside the panel and all are good.

we were wondering if this is still included in your warranty period. if so, what shall we do.

thanks.

i got your email,my engieer will get back to you soonly.