Replacment parts

[syil]

i`m sorry Neil take so many hours to solve X3 cnc.if you need any replace parts let me konw,we will sent to Frans.
Your sincerely
xushuo

[iGG1e]

Got to say the whole spindle situation is driving me up the wall a bit.

Originally Posted by neilw20 I found it necessary to re-crimp EVERY crimped connection. Tightened all the screws. A nut fell in the power supply and Syil sent me another. Thanks. Now ALL of the loose connections have been fixed my SX3 runs 3-6 hours per day most of the time. Once I figured the un-documented pump wiring, and added power sockets for lamp and pump, my machine is 100% reliable. The pump hardware is pretty ordinary and nothing fitted. Even had to repair the magnet and the seal clapped out in 4 hours. Lucky (for me) I have a lathe. Syil. I AM NOT HAPPY WITH THE STUPID SPINDLE BEEP BEEP, TIME WASTING WAIT FOR IT TO START STOP. THIS ISSUE ADDRESSED MANY TIMES HAS NEVER BEEN FIXED. YOU HAVE JUST MOVED ONTO NEXT MODEL AND SCREW THE EARLY VERSION and CUSTOMERS. IT IS NOT GOOD ENOUGH FOR SOMETHING THAT COULD HAVE BEEN DONE PROPERLY. 16 MONTHS, and lucky I can invent my own fixes. I offered to fix all the problems for free given the documentation and it really seems that you don't care. Now there. I have said it. Any comments??

[fastlanecafe]

Gotta love those Chinese- always the same response- " We do better next time". Years ago a guy I know bought a container load of drill presses. They were supposed to be 3/4 HP motors. Upon receipt, he found they had no power and on closer inspection he found the motor tag said 1/4HP and the 1 had been over stamped with a 3. When he complained to the Chinese, they responded by blaming the motor factory and offering to sell him the proper motors. Looks like not much has changed.

[neilw20]

Originally Posted by syil i`m sorry Neil take so many hours to solve X3 cnc.if you need any replace parts let me konw,we will sent to Frans. Your sincerely xushuo

OK Thank you. Please send non BEEP BEEP BEEP replacement controller for SX3.
It takes over 2 minutes EVERY tool change waiting for it to STOP and START.
That makes a 20 minute job 1 hour. My time is worth something.

Mach3 control sends PWM to run. Machine must start instantly.
Mach3 control sends PWM to stop. Machine must stop instantly.
Mach3 control sends DIRECTION to change. Machine must reverse instantly.

It is as simple as that. No excuses. No reasons.
Non BEEP BEEP non auto button pushing replacement version please.

Thankyou.

Does any body else need one?

[iGG1e]

Originally Posted by neilw20 Does any body else need one?

I wouldn't say no!