Newbie- NEW SYIL C6 AND X4PLUS, NEED HELP PLS.

[neilw20]

Originally Posted by gio1976 Sir PEU, your profile also didnt workout(screen looks like mach3mill). Am i doing something wrong? Tried all combinations on the switch on c6 lathe. nothing worked, except when spindle is on manual. There's no spindle and flood control sockets. x, z and spindle "encoder" wires all cramped into one socket. Is it possible syil china used different ports? thanks.

ANYTHING is possible.
Syil have not been consistent (due I think that are not skilled in specifying to East Crystal what they NEED) with the pin allocation. Take some pictures of your BOB. Thats the PCB that connects to the PCB cable.

[gio1976]

here is the photo of our control box. not sure where is the BOB.

s1,s2, and s3 are lit up even limit switches are not triggered.

[PEU]

Sorry but I can't help here, my C6 box is different on the outside and the lathe does not have a variable speed knob, slightly different beast

Does the chuck spin?

[gio1976]

waaaaaahhhhh!!!!! (


spindle spins only on manual....thats when power switch pointed to the left, and direction pointed to the right/forward.

no x z motor movement even on JOG.


SIGH!!

[neilw20]

I see you have the 5 axis BOB.
Down near the limit switch connector is a LED.
I believe this is the charge pump LED. It must be on for the axis to move.
There is a jumper near it.
The pin configurations for the X and Z axis will be the same as the X4+.
Charge pump should be the same also (hopefully !)
If you move an axis to a limit, does the limit switch light go out?

[gio1976]

SIR NEIL I CANT EVEN JOG THE AXES. BUT IF I TRIP THE LIMIT SWITCH MANUALLY THE S1 AND S3 LEDS GO OUT.

[PEU]

can you reset Mach3 (green reset button) or it gives you an error?
Do you have the charge pump output pin enabled? what pin# ?

[john_t_h]

It looks exactly the same as mine and I had the exact same problem. The problem was the charge pump in Mach 3 wasn't configured.

[ToolMach_Aust]

gio.

Try this C6 profile. It is different to John TH's and worked on a C6 that was from the same shipment.

Originally Posted by gio1976 SIR NEIL I CANT EVEN JOG THE AXES. BUT IF I TRIP THE LIMIT SWITCH MANUALLY THE S1 AND S3 LEDS GO OUT.

[gio1976]

I WANT TO THANKS ALL YOU GUYS FOR HELPING OUT.

THANKS MR WANG, SYIL CHINA. FOR SENDING C6 PROFILE. IT WORKED !!!!

GOT MY FIRST PIECE ALREADY, AND A SECOND.

heY FERDIE, THANKS. TO MY FRIENDS, FAMILY AND EVERYBODY WHO MADE THIS PIECE POSSIBLE CANT DO IT WITHOUT YOU GUYS HEHEHEHE. (am i receiving an award here???_ nyahahaha.

SERIOUSLY GUYS. ill be posting some more workpiece and QUESTIONS in the future.

[gio1976]

not bad for a newbie ?...

[Mongkol]

Hi Gio,
I am interested in C6turn from Syil, Did you import from china?
How much is the prices for this model? Machine is good or bad. Pls advise

Mongkol