| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Syil Products Discuss Syil milling machines and conversion kits here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-06-2008, 10:00 AM
| |||
| |||
What is the best software for converting an Autocad drawing file into DFX file to run with Mach 3?
__________________ Martin    |
|
#2
07-06-2008, 10:48 AM
| ||||
| ||||
| AutoCAD. But if you don't have AutoCAD, try A9 Converter at www.a9tech.com
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
07-06-2008, 10:51 AM
| |||
| |||
| Autocad creates DXF files... but I think you need G-code file to run in Mach 3... To get a G-code file from a DXF... it depends on if your part will be 2D or 3D. There are several CAM softwares out there. All price ranges(free to $10,000.00 plus) - all depends on your needs. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is there a DFX; DWG file converter for Mastercam 9.1? | Shotout | Mastercam | 11 | 10-15-2006 11:32 AM |
| igs file in autocad? | Johnmirra | General CAM Discussion | 4 | 10-22-2005 11:20 AM |
| VB File converter | MetLHead | Visual Basic | 4 | 06-20-2005 10:16 PM |
| need Autocad .dwg file converted | RcCNC | Mastercam | 12 | 04-29-2005 05:10 PM |
| Poor Mans Autocad solid converter | CAMmando | Mastercam | 2 | 07-17-2003 09:10 AM |
| | |
Linear Mode
