Newbie- Production run with SX3

[TME]

I have just landed a possible project and need to do it on a CNC milling machine. The job is small enough to run on the Syil SX3 and entails machining cut-outs through the wall of an aluminium extrusion. The thickness of material to be removed is approximately 1,6mm (1/16th") and is a rectangle of around 50 X 16mm (2" x .6").

My question is: will the SX3 manage 15000 (fifteen thousand) of these cut-outs? in other words running constantly for approximately 8 hours a day for 4 weeks.

Your comments on this will be most appreciated.

Best regards

Theo

[syil]

Please check Syil Africa for more details.
here it is them contact info: http://www.syil.co.za/

[metalworkz]

Hello Theo,
It sounds like a good job for the SX3 to me. How many cutouts per extrusion?
Regards,

[TME]

Hi Wes,
There are 2 cutouts, one on either side

Theo