| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Syil Products Discuss Syil milling machines and conversion kits here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-22-2007, 07:04 AM
| |||
| |||
Hello Everyone, I mess up with machine but I don't know how to setup homing positions. Any help? Thank you  |
|
#2
10-22-2007, 10:29 AM
| ||||
| ||||
Only the homing a problem, or have you broken a limit switch wire? Very easy to break. Look on diagnostic screen.
__________________ Super X3. 3600rpm. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way. |
|
#3
10-22-2007, 08:41 PM
| |||
| |||
| Hi neilw20! For what should I look in the diagnostic screen? And if hopefully nothing is broken how do I setup soft limits? Thank you |
|
#4
10-25-2007, 02:54 PM
| |||
| |||
| Are you using mach 3? Go to the diagnostics page and see if the lights light up when you manually work the homing switches to see if they are working. You might get better luck asking mach 3 questions in the mach 3 forum. |
|
#5
10-26-2007, 02:19 AM
| ||||
| ||||
| Homing is the same on all machines running Mach 3. There is documentation for the procedure with Mach. The basics are homing to a known location. Jogging to the extents of the machine and entering those numbers off the DRO into the soft limits area.
__________________ Direction, Commitment, Follow Through |
| Sponsored Links |
| |
|
#6
11-11-2007, 12:14 AM
| ||||
| ||||
| You should check out the homing post with the video. Hope it helps.
__________________ Direction, Commitment, Follow Through |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Syil X2 setup with Mach3 | 43hudson | Syil Products | 3 | 03-27-2007 07:52 AM |
| New setup with Mach3 - Limits work, homing doesn't | journeyonline | Mach Software (ArtSoft software) | 10 | 03-21-2007 09:09 PM |
| what is the best homing and limit switch setup? | Bryscnc | Machines running Mach Software | 1 | 09-28-2006 05:37 AM |
| Homing | Sanghera | TurboCNC | 8 | 05-09-2006 06:47 PM |
| homing vs 0,0,0 | planeflier | Mechanical Calculations/Engineering Design | 7 | 02-07-2006 09:02 PM |
| | |
Using Mach 3? 
Linear Mode
