Check the coupler that connects the Y axis motor to the screw; it sounds like it might be loose.
I have a Summit VS242B CNC knee mill. Today, when I started it up, there is a noticeable "squeak" only when I move the Y axis towards me. It squeaks when I move the Y axis manually also. There does not seem to be any drag on the axis. Any suggestions?
Similar Threads:
- Need Help!- Z axis direction
- Need Help!- Y AXIS WRONG DIRECTION
- New 4th axis one direction only
- Need Help!- X axis works fine but Y axis direction is erratic
- Problem- C axis direction
Check the coupler that connects the Y axis motor to the screw; it sounds like it might be loose.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
Thanks for the info Andrew. I will check it out