Need Help! Syil X7 stepper driver problem


Results 1 to 2 of 2

Thread: Syil X7 stepper driver problem

  1. #1

    Default Syil X7 stepper driver problem

    Good day forum members

    I need advice on a replacement stepper driver for a MiGe FHB3112 80Nm 4.3A stepper motor. The original stepper driver was a Chinese 3MA860 driver and the replacement driver the factory sent us is a Chinese 3M883 driver - see attached photos. The old 3MA860 stepper driver used 80VAC while the new 3M883 stepper driver uses 24-80V DC.

    My question:

    Is it possible to convert the 80VAC to 80VDC

    Or is there another way of wiring this new drive to the motor



    Kind regards

    Ralph

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2015
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Syil X7 stepper driver problem

    The driver seems to still be available....check out this link:

    3 phase Stepper Motor Driver 3MA860 For NEMA 23 34 Stepper 18 80V DC or 18~60V AC input 2.0 8.3A output for CNC-in Motor Driver from Industry & Business on Aliexpress.com | Alibaba Group

    Also, I would hope that either Syil or the dealer could assist in determining if the unit they sent was a suitable replacement.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Syil X7 stepper driver problem

Syil X7 stepper driver problem