- Need Help!- Syil X7 stepper driver problem
-
Registered
Syil X7 stepper driver problem
Good day forum members
I need advice on a replacement stepper driver for a MiGe FHB3112 80Nm 4.3A stepper motor. The original stepper driver was a Chinese 3MA860 driver and the replacement driver the factory sent us is a Chinese 3M883 driver - see attached photos. The old 3MA860 stepper driver used 80VAC while the new 3M883 stepper driver uses 24-80V DC.
My question:
Is it possible to convert the 80VAC to 80VDC
Or is there another way of wiring this new drive to the motor
Kind regards
Ralph
Similar Threads:
-
-
Registered
Re: Syil X7 stepper driver problem
The driver seems to still be available....check out this link:
3 phase Stepper Motor Driver 3MA860 For NEMA 23 34 Stepper 18 80V DC or 18~60V AC input 2.0 8.3A output for CNC-in Motor Driver from Industry & Business on Aliexpress.com | Alibaba Group
Also, I would hope that either Syil or the dealer could assist in determining if the unit they sent was a suitable replacement.
- Need Help!- Syil X7 stepper driver problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules