- Need Help!- SX3 CNC Home build info please.
-
Registered
SX3 CNC Home build info please.
Hi,
Can anyone help me? I have a Syil SX3 and CNC conversion kit which I have obtained with no information (just a pile of bits). I've almost completed the mechanical part and now I am wiring the electrical part. I would appreciate any information, wiring, drawings etc. I have an “East Crystal 5 Axis CNC board - Rev 1.4” and a “Spindle control card PCF Rev 1.4” which appears to have been modified.
Any help would great.
Cheers
Chris
Similar Threads:
-
-
Member
Re: SX3 CNC Home build info please.
You are in the wrong forum. You have a SIEG SX3 (not a Syil). You can find lots of infor about doing the conversion if you search and/or repost this in the Benchtop SX3 forum:
http://www.cnczone.com/forums/x3-sx3-g0619-g0463/
Syil originally briefly sold a cnc'd version of the Sieg SX3 (IIRC), but then quickly branched to their own line of products, I believe in the 2008 time frame.
- Need Help!- SX3 CNC Home build info please.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules