- Tsugami NT12, Fanuc 3T Spindle index problems.
-
Member
Tsugami NT12, Fanuc 3T Spindle index problems.
I have a Tsugami NT 12 with a Fanuc 3T control.
The machine goes into Spindle Indexing alarm (machine alarm, no alarm code shows up on the Fanuc screen), 8 of 10 times when I use the M-codes for spindle orientation.I suspect perhaps the encoder is not working properly. Since I have 2 similar machines where the other is working perfectly, I figured to try and test the encoder from the other machine. Now my questions are what is the procedure for this? How do I "reset" or "zero-return" the encoder afterwards? I do not have a controlled axis, so there is no actual procedure for zero-ing the spindle.
Please, any help is much appreciated.
Similar Threads:
-
- Tsugami NT12, Fanuc 3T Spindle index problems.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules