- Powering 1992 Citizen L-16
-
Registered
Powering 1992 Citizen L-16
I just got this lathe and am unsure what to purchase to power the required 200v 3 phase. I have a rpc that supplied 230 volt 3 phase. Do I need to purchase 3 buck/boost transformers to drop each leg from 230 to 200? Thanks, Chris.
Similar Threads:
-
-
Registered
Re: Powering 1992 Citizen L-16
Ok, so I need 2 240/120 16/32 1kv buck boost transformers, They get installed between the 220 single phase panel and the rpc.
-
Registered
Re: Powering 1992 Citizen L-16
Correction to my earlier post. I will be wiring lathe in an open delta configuration after the rpc.
- Powering 1992 Citizen L-16
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules