Need Help!- Help needed in 3D offset

[madaouk]

Hello ... I am milling using (3doffset) 200 small piece on a sheet on stainless 30cm by 20cm... The problem is that the machine doesn’t mill one piece at a time, it goes and do little bit of a piece here then a little bit of another there , and lots of wasting time …

[tnik]

in the 2 axis options, you can try checking the box 'Depth First' and also play with the 'sort type'

[madaouk]

tnik .. the 3d offset doest have a 2axis options an I DIDNT FIND depth first in 3axis options , but the 'sort type' worked well , thanx ..

[tnik]

oh sorry, I was thinking of your other post.. I didn't catch that you said 3d offset..

Thats one I can't help with, I don't do alot of 3d toolpaths, and I've never used the 3d offset.. most 3d that I've used was the 3d cut, project, truemill, z finish, and planar..

if you want to post the file (and if I can get time to look at it) I'll show you what I would do.. not making any promises tho..