Surfcam 2016


Results 1 to 10 of 10

Thread: Surfcam 2016

  1. #1
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Surfcam 2016

    Today I click accidentally on F1 key and help appears.
    I was amazed because I saw that the icons were different !!
    Will the 2016 version will have a visual modification?





    Similar Threads:
    Attached Thumbnails Attached Thumbnails Surfcam 2016-capturar-jpg  


  2. #2
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Does anyone get 2016 version?



  3. #3
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    It became available the 25th of last month in the Vero Portal.

    Its now called Surfcam Traditional 2016 R1.

    Last edited by Billetgrip; 02-01-2016 at 04:45 PM.


  4. #4
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Found my first glitch.

    Moving geometry from one layer to another causes a complete shutdown of Surfcam without warning.



  5. #5
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Quote Originally Posted by Billetgrip View Post
    Found my first glitch.

    Moving geometry from one layer to another causes a complete shutdown of Surfcam without warning.
    Could not reproduce this error. Here works normal.
    One thing I notice is CTRL+V, to activate Cview don't work.



  6. #6
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Quote Originally Posted by forjaco View Post
    Could not reproduce this error. Here works normal.
    Happens on my work AND home comp. About to load it on the other 3 comps here and see if it happens.

    Quote Originally Posted by forjaco View Post
    One thing I notice is CTRL+V, to activate Cview don't work.
    Try CTRL+C



  7. #7
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Quote Originally Posted by Billetgrip View Post
    Happens on my work AND home comp. About to load it on the other 3 comps here and see if it happens.
    I try and at 2nd It closes. I open again and keep trying about 5 times and are OK.

    Try CTRL+C
    CTRL+C are OK, but not CTRL+V



    Attached Thumbnails Attached Thumbnails Surfcam 2016-capturar-png  


  8. #8
    Member
    Join Date
    May 2013
    Location
    US
    Posts
    142
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Have you found any advantage to using 2016 over 2015 yet?

    So far the only improvement I've found is the "Face Mill" toolpath seems to make more sense when using the spiral method. It doesn't make that useless pass in the middle anymore.



  9. #9
    Member forjaco's Avatar
    Join Date
    Feb 2012
    Location
    Portugal
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    Quote Originally Posted by Billetgrip View Post
    Have you found any advantage to using 2016 over 2015 yet?

    So far the only improvement I've found is the "Face Mill" toolpath seems to make more sense when using the spiral method. It doesn't make that useless pass in the middle anymore.
    No. Today I report 5 bug to support.I will continue to use the 2015 until 2016 be corrected.



  10. #10
    Registered
    Join Date
    May 2007
    Location
    Taiwan
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Surfcam 2016

    At C:\Users\Public\SURFCAM\SURFCAM2016\Config\
    Open surfcam.ini
    Find UseNewToolbarStyle=1
    Change 1 to be 0

    You will get the 2015 Icons



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Surfcam 2016

Surfcam 2016