Why surfcam doesn't have UNDO feature?

[qmas99]

Surfcam users are the best!, do it right 100% so they don't put in UNDO feature.

[rbest27]

I think you're right...I never make mistakes!!

[CNCRim]

yes it does have undo, look at it again.... the only one don't has undo is surface.

[moldcore]

“yes it does have undo, look at it again.... the only one don't has undo is surface.”

Tell me you’re kidding newtexas2006. Surfcam is missing too many basic features that even Bobcrap and programs costing 1/10 have. Of course it has more to offer, but if they don’t start getting their asses in gear and start putting out a product that people care about they won’t have anymore customers who care.

[tnik]

some features have an undo function, some don't.

one tip I've found is if whatever you do doesn't have an undo function, sometimes you can open the delete function, undelete last, and delete what was messed up in the first place. Doesn't always work but its saved me a couple times.

and remember, surfcam is more cam than cad, so sometimes you want to use an outside cad program and import into surfcam.

[Cammotion]

I've been harping on this one for years. I think there should be a global undo/redo that goes back to the beginning of the session Like Surfcam Solids had.

[chmillman]

I've been harping on this one for years. I think there should be a global undo/redo that goes back to the beginning of the session Like Surfcam Solids had.

Well, if you haven't saved, just re-open the file without saving. Or always work on a copy of the file.

and remember, surfcam is more cam than cad, so sometimes you want to use an outside cad program and import into surfcam.

Yes. I have gotten used to doing everything that concerns geometry creation or modification outside of Surfcam, so I rarely need an undo. Mostly I use Delete and there is an undo for that... However...

One place Surfcam REALLY needs an undo is in the toolpath editing department. If you are making a series of edits to one toolpath, and you make a mistake at one point (awfully easy to do as the editor is so bad), you are pretty much obliged to quit the editor without saving and start over. Very annoying. --ch

[tnik]

One place Surfcam REALLY needs an undo is in the toolpath editing department. If you are making a series of edits to one toolpath, and you make a mistake at one point (awfully easy to do as the editor is so bad), you are pretty much obliged to quit the editor without saving and start over. Very annoying. --ch

I personally haven't tackled that monster yet, played around with it a bit and it really didn't look like a fun tool to use

[planar39]

most of us get burned by this, ive learned to save often when im confident, save under a new name -ex. part1, part2, when im unsure, and when undo isnt there and it was messed up, just go to file-and grab the last good saved part. Photoshop is a fun program thats kind of similar.

[mdlmkr]

The no undo under the join command is the one that kills me. I know...save and reopen, but if I have imported an iges file and I want to join the million splines that make up a curve, its a pain to keep saving and reopening every time I miss a line. Yes, I know that there are work arounds, but undo would be nice here!

[Grifftek]

Just wondering if there are any users local to me, im in Downey CA. 90242

Thanks

Bill

[lagrandebug]

Surfcam does have some what of a undo button. If you do something and you don't like the results then most of the time you can go delete that like or surface and then hit "UNDELETE LAST" hit is once and the one you don't want will come back hit it again sometimes two or three times then go in and erase the result you didn't want and most the time the original will be there under it. Let me know if it worked for you