Post Processor


Results 1 to 17 of 17

Thread: Post Processor

  1. #1
    Registered
    Join Date
    May 2005
    Location
    usa
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default Post Processor

    Does Anyone Have A Post Processor For An Okuma Lathe
    With An Osp 5020l Control For Surfcam

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2005
    Location
    u.s.a
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Yes, i got post for it
    it work very good



  3. #3
    Registered
    Join Date
    Feb 2005
    Location
    u.s.a
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Does anyone have post for Surfcam velocity Agie wire edm?



  4. #4
    Registered tnik's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    259
    Downloads
    0
    Uploads
    0

    Default

    agie 2axis post..

    Attached Files Attached Files


  5. #5
    Registered
    Join Date
    May 2005
    Location
    usa
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    would you be interersted in sending in to me
    or attaching it here



  6. #6
    Registered tnik's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    259
    Downloads
    0
    Uploads
    0

    Default

    it is attached here..
    AGIE.zip is in my post above.



  7. #7
    Registered
    Join Date
    May 2005
    Location
    usa
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    sorry about that i was talking to sang sys about the okuma post



  8. #8
    Registered
    Join Date
    Feb 2005
    Location
    u.s.a
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Here is Okuma act35 Lathe 2x

    Quote Originally Posted by scubanick View Post
    sorry about that i was talking to sang sys about the okuma post

    Sorry, for the delay

    Here are smartcam post for okuma act35 lath

    if you any questions email me i will anwere if i can.

    Attached Files Attached Files


  9. #9
    Registered
    Join Date
    Feb 2005
    Location
    u.s.a
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Ok, Here is postform for lathe OKAct35

    Post for ACT35

    It work very good.

    Question email me.

    Attached Files Attached Files


  10. #10
    Registered
    Join Date
    Mar 2004
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default

    Does anyone have the Post Processor for Agie CNC 100 that works in BoBcad 16.1 Wire.



  11. #11
    Registered tnik's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    259
    Downloads
    0
    Uploads
    0

    Default

    Bobcad will create the post for you, just contact them..



  12. #12
    Registered
    Join Date
    Mar 2004
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Post for v16 Bobcad

    Thanks for the reply, however Bobcad told me today I would have to upgrade they no longer support V16.1 Wire.



  13. #13
    Registered
    Join Date
    Jan 2005
    Location
    Thailand
    Posts
    72
    Downloads
    0
    Uploads
    0

    Default Postprocessor to use DeskCNC softw. & HW with Surfcam code ?

    Hi, does someone know which Surfcam Postprocessor might work with a DeskCNC setup ?

    Thanks

    Daniel



  14. #14
    Registered tnik's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    259
    Downloads
    0
    Uploads
    0

    Default

    DeskCNC setup? sounds like it's software.. you would need to find a post that outputs the 'gcode' for your machine.. from looking at deskCNC's manual, its probably close to fanuc/haas.. I would start with one of those, and then edit it as needed..



  15. #15
    Registered
    Join Date
    Jan 2005
    Location
    Thailand
    Posts
    72
    Downloads
    0
    Uploads
    0

    Default

    Hi tnik, thanks for hint. DeskCNC is actually CAM/CNC software + controller hardware.



  16. #16
    Registered
    Join Date
    Oct 2006
    Location
    USA
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default

    anyone have a haas lathe post with canned cycles?



  17. #17
    Registered
    Join Date
    Jan 2010
    Location
    peru
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    señor. buenos dias porfavor yo tengo un cpu de torno cnc marca intertech 42-170 y el cpu es syntec baby2 queria saber si usds. tienen uno para venderme o el renplazo que paso la pila de litium se gasto la cambiamos y y la pantalla nos pide inserte diskest mi telef. 01-4582591 preguntar por ing.diaz o escribir al mail.diaz_delgado_20@hotmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post Processor

Post Processor