Change IJ to R


Results 1 to 3 of 3

Thread: Change IJ to R

  1. #1


  2. #2
    Member CNCRim's Avatar
    Join Date
    Feb 2006
    Location
    usa
    Posts
    992
    Downloads
    0
    Uploads
    0

    Default

    I don't have the physical post in front of me, but you can open the post itself under post folder, the option IJ or R should be at couple paragraph down from the head of the post I think 0 for R and 1 for IJ.

    The best way to learn is trial error.


  3. #3
    Registered
    Join Date
    Dec 2009
    Location
    Sweden
    Posts
    80
    Downloads
    0
    Uploads
    0

    Default

    Hi,

    in your Mpost file there is a line which probably looks like this:
    CtrCode I J K

    You will have to change that line as follows:
    CtrCode R

    /Thomas



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Change IJ to R

Change IJ to R