I don't know how to change the post to list the tools on a posted program but the operations manager has a function for exporting a tool list, it is on the clock icon. It gives you 2 options for tooling, output tooling setup and output tooling graphics. You can try those, it will pop a window up in your web browser and than you can print those. We use them and put them in a clear folder and store them with a job box for our repeatable work. It also keeps the programs smaller and is easier to use in our opinion as you don't have to scroll thru the small screen on the controller searching for all of the tools. But, I can see some uses for your method. Good luck.