Problem 5 axis post processor


Results 1 to 6 of 6

Thread: 5 axis post processor

  1. #1
    Registered
    Join Date
    Sep 2009
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default 5 axis post processor

    Im running a parallel to curve command on a blade dovetail that requires 5 axis processing on a Haas VF3 trunniun. When I run simulation or verification on the computer the tool path is fine. When I run the code on the machine the primary rotary table is rotating a full circle near the center of the tool path. Is there a limit I can set to prevent these little circles?

    Similar Threads:
    Last edited by jjohnson2081; 12-15-2010 at 04:04 PM. Reason: spelling


  2. #2
    Registered
    Join Date
    Nov 2010
    Location
    Turkey
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Can you post the code?



  3. #3
    Registered
    Join Date
    Sep 2009
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Yes I can post it out. The posted code is where I see the problem



  4. #4
    Registered
    Join Date
    Nov 2010
    Location
    Turkey
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    I was trying to say that weather you can send the code so that we can take a look at it



  5. #5
    Registered
    Join Date
    Sep 2009
    Location
    usa
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    I'LL try to upload the file



  6. #6
    Registered
    Join Date
    Feb 2011
    Location
    bl
    Posts
    252
    Downloads
    0
    Uploads
    0

    Default Re: 5 axis post processor

    ***



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

5 axis post processor

5 axis post processor