- Need help with this Lathe Program
-
Registered
Need help with this Lathe Program
Is it correct?
%
o12345
G0 G54
G90
T0101
G97 S500 M3
G96 S200
G50 S2500
M8
G0 X-2.600 Z0.0
G1 X.400 Z0.0 F.01
X.500 -.50
Z-.700
X.775
X.875 Z-.750
Z-1.700
X1.9
X2.0 Z-1.750
Z-2.200
X2.400 Z-2.250
Z-3.325
G0 X3.5
M30
%
Similar Threads:
-
-
Member
Prog
Here you go
G0 X.7 Z.05
G50 S3000
G96 S1000
X0.
G99 G1 Z0. F.01
X.4
X.5 Z-.05
Z-.75
X.775
X.875 Z-.8
Z-1.75
X1.9
X2. Z-1.8
Z-2.25
X2.9
X3. Z-2.3
Z-3.375
X3.12
G0 X3.7
Last edited by ChrisW; 10-17-2012 at 12:46 PM.
Reason: correction
-
Registered
Do you still need help? There is a host of things that I would change to make both programs safer. If you could send a pic or print of what you are trying to make I could give a few pointers.
Janos
- Need help with this Lathe Program
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules