- Need Help!- Help me wrap my head around pressurization
-
Member
Help me wrap my head around pressurization
I have built a test bed that I am using for experimenting with stirling engines. The engine is 2 cylinder alpha with the hot and cold being the same size (1 inch stroke by 2.3ish diameter).
Now the engine starts running on its own at about 450 - 500F hot and 60F cold. I am wondering how much lower I could get by pressurizing the whole system. Trying to find info on this and having a hard time. the max I am thinking is 100psi. I am hoping to get under 400F.
thanks a lot
sam
Similar Threads:
-
- Need Help!- Help me wrap my head around pressurization
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules