Need Help! Allegro A6615SED stepper motor driver - CNCzone.com-The Largest Machinist Community on the net!

BearPaw · #1 02-02-2010, 06:26 AM

Hello All,

I scrapped a board from Epson printer which has an IC named A6615SED (probably made by Allegro - has an "A" logo). But I cannot find a datasheet for it. Can anyone help me with this IC? I want to use board and motors for my hobby project.

Thank you.

silvio123 · #2 02-05-2010, 08:26 AM

Hello, have you find it? I also need this datasheet. I was thinking to try to understand the schema beginning from the datasheet of E01A39CA, an other big Epson IC on the board, but I can't find its datasheet too.
My board is C483 MAIN-B.

Silvio

undertalk · #3 03-16-2010, 10:06 AM

I have actually 3 scrapped boards, one of them is A6628SEDT which apparently pin by pin compatible... I could not find any info about them... nor another Allegro similar product. It looks like A3988 has the same functionality, but not the same package... A6628 and A6615 are PLC44
any help?

berin · #4 01-28-2011, 06:00 AM

I'm in the same boat I scraped a epson c64 printer and it has a A6615sed on it. I was looking at using as a driver. Just cant seem to find data sheets.

berin · #5 01-28-2011, 06:22 AM

I found the data sheets for the a6615sed If your intrested in the links send me a message

berin · #6 01-28-2011, 07:02 AM

Ok, between these two images you more or less have every thing you need to make a PCB for this driver. any one makes a PCB for it please post it.
EPSON C43????? - ?????
http://www.jqdzw.com/article/UploadPic/2010-6/2.jpg

google chrom translater works well for the link below
EPSON*C4X
http://www.slwx.com.cn/bbs/UploadFil...6504081848.jpg

berin · #7 01-28-2011, 07:07 AM

Ok, between these two images you more or less have every thing you need to make a PCB for this driver. any one makes a PCB for it please post it.
EPSON C43????? - ?????
http://www.jqdzw.com/article/UploadPic/2010-6/2.jpg

google chrom translater works well for the link below
EPSON*C4X
http://www.slwx.com.cn/bbs/UploadFil...6504081848.jpg

risteski · #8 02-28-2011, 10:52 AM

Hello all,
and J search datasheet for a6615sed but J can't find

((. Berin can you send me datasheets for this step driver j realy needed. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Allegro Bipolar Stepper Driver A3986	BCwanderer	Open Source Controller Boards	826	07-25-2011 04:32 PM
Allegro 3938 BLDC driver board	originator	Open Source Controller Boards	6	05-10-2011 07:50 PM
Need Help!- Power Supply for 4 Stepper Driver 32-65VDC and 4 Stepper Motor 65V 2.3A	guy2b1	DIY-CNC Router Table Machines	16	03-08-2011 05:50 AM
Allegro A3979 Stepper Driver Tuning	jkpugh	Stepper Motors and Drives	7	07-06-2009 03:13 PM
Allegro A3979 Stepper driver tuning	jkpugh	General Electronics Discussion	0	12-03-2006 01:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)