hi i have this board from ebay, and finally i got everything working except i cant disable the fourth motor. so its running hot while doing nothing.
here are some screenshot of the settings. maybe i missed something.
the X y Z axis are working.
and another question, the 2 black transistors with the cool blocks (little ones) are running quit hot with 2 motors, is this ok ? i dont wanna blow it right away.
i use a powersuplly dc 24 volt 1,5 amp i think way to low for the board and the motors so there will be a bigger one soon. by the way anybody know what voltage to use for these motors? it only says 0,6 A/ph 7 ohm.
they are actuators have to get rid of the piston , but wanted to know ef they worked, and the do, there are sooooo strong and slow cant hold the piston back with my hands.