LinkBack URL
About LinkBacks
The data for these is on the IMHS web site, I just sold a couple on ebay they are standard step and direction control, 2 amp Current settable chopper drives require a 24vdc supply.
Al
| | |
Has anyone heard of an IMS IB462 stepper drive. What would it take to control these for home brew CNC.
The data for these is on the IMHS web site, I just sold a couple on ebay they are standard step and direction control, 2 amp Current settable chopper drives require a 24vdc supply.
Al
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
What about an interface between the 3 drives and the paralell port. Does someone make a board for this?
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
