| | |
Today I created a new blog: http://mardus-kreutz.blogspot.com/
The blog will provide information about the design,as well as "step by step" instructions for the people interested into build them.
Best regards,
Kreutz.
This is great.
You may know this, - to get the blog listed in the web search indexes such as google, yahoo, msn, the site should be registered with those indexes.
Once registered these indexes will be updated and after a few days a web search for 'Mardus Kreutz' will list your blog.
The indexes have individual websites to do all that. It's free.
ed
Ed;Originally Posted by ediestel
Thank You, I will do that.
Best regards,
Kreutz.
A blog that chronicles the attempt to construct a CNC from scratch without prior experience can be found here.
I intend to use the Mardus Kreutz micro stepper for this CNC.
http://cnclayman.blogspot.com/
Once the electronics are assembled, the required software will briefly be discussed.
In a third phase the mechanical parts will be build. I intend to use "Mineralgusstechnik mit verlorenem Kern " for the frame - that is ' minerals/epoxy /resin composite with a lost core technique '.
This is a teaching project meant to familiarize the student with electronics, mechanics, robotics and CAD/CAM. It assumes no specific knowledge, just common sense.
I already sent the blog address to most of the search engines using a free software called WebCEO.
Thank you for your help!!,
Aloha,
Kreutz.
In case you are interested in the Mardus Kreutz unipolar microstepper and want to build them please share your interest.
PCB in small quantities are rather expensive, better prices for orders of > 25 PCB.
Post your interest here or PM.
ed
FYI
Part 3 of the series was added to the blog: http://mardus-kreutz.blogspot.com/
FYI
Part 4 of the series was added to the blog: http://mardus-kreutz.blogspot.com/
Posting Permissions
| | |
LinkBack URL
About LinkBacks
