| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Stepper Motors and Drives Discuss stepper motors, drivers and related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
10-15-2004, 08:35 AM
| |||
| |||
| Drivers for those are quite expensive. And as far as I know there is no "hobby level" driver for 5-phase. Even if there is, it will be more expensive as it needs more driver transistors. If you cannot recover/rebuild those from the copier, you are probably better off looking for 2-phase motors. Those I know of making 5-phase drivers are Vexta and Berger-Lahr. There probably are others.    |
|
#3
10-15-2004, 08:35 AM
| |||
| |||
| You will be better off buying some cheap bi-polar steppers, and using a xylotek or gecko's. 5 phase controllers are not cheap and without the controller the motors you have are not usable. Sell them on ebay and get some you can use.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VFD for a single Phase motor!! | Yepez | Servo Motors and Drives | 4 | 08-10-2009 07:53 PM |
| Staggering motors | viktorcnc | Stepper Motors and Drives | 12 | 10-12-2005 05:56 AM |
| 3 phase transformer on single phase? | jevs | General Electronics Discussion | 4 | 03-19-2005 12:25 PM |
| Series Bipolar and parrallel bipolar? | CNCadmin | FAQ of CNC Machine building | 0 | 09-08-2004 08:17 AM |
| 3 phase with idler and draw string only | gtslabs | General Electronics Discussion | 2 | 06-19-2004 05:11 PM |
| | |
Linear Mode
