| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Stepper Motors and Drives Discuss stepper motors, drivers and related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-14-2008, 11:10 AM
| |||
| |||
Hello i am building my 3rd machine i am useing vexta pv-269 steppers and kelling 6050 drives the steppers i have are 2.5v 4.4a and my power supply is putting out 55v and i have the drives set at 4.5amps. I was just testing the machine for about 15 mins. and the steppers got super hot ABOUT 150-180DEGREES Anyone have any advice how to get them to run cooler? thanks jeff  |
|
#2
08-14-2008, 06:53 PM
| ||||
| ||||
| Looking at their website, the PV-269 is 2.8 amps and 4.2 volts. Try lowering the current to 2.8 amps or less.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- does any one have these steppers | caseworks | Stepper Motors and Drives | 0 | 02-21-2008 09:44 AM |
| Where to get steppers | legomanww | Stepper Motors and Drives | 10 | 06-08-2007 01:46 AM |
| STEPPERS Will Someone Please Help!!! | bill south | Stepper Motors and Drives | 5 | 08-29-2006 07:55 AM |
| Two steppers on one 201??? | Greolt | Gecko Drives | 2 | 06-13-2006 06:37 AM |
| Why Not Use Steppers | Steve Etter | Machine Problems, Solutions , Wireless DNC, serial port | 6 | 12-20-2003 10:04 AM |
| | |
Linear Mode
