Berger Lahr 5 phases motor/driver units

[AlainB]

Hi,

I have these 2 nice motors and before trying anything I am hoping to find someone who know these motors and could help me interfacing them with a computer.

Here is what I know about them:

Part number 12970 0151 00 (this is for the whole assembly I think)
and VRDM 564/50 LNA, this is the motor number only.

I asked to the US representative and they nicely sent me datasheet for the motor (only)

Each motor is equiped with an encoder and there is 5 L6203 for the power stage.

Each motor is equiped with 2 ports for optic fibers.

On the left motor (the 3 left pictures are from the same motor) there is a connexion for groung, one for 36 volts and 3 other one.

On the right one there is an extra 24 volts connexion and the 2 purple wires are connected together.

On each motor, there is also an adjustment pot numbered from 0 to 9.

That is all I know. Anything else would be only guess from my part.

I would like to interface them with my computer.

Any help will be grately appreciated.

Alain

[L_KyD]

Hi alain, I have read your problem but I can't help you.
But I noticed that you have the doc of the motor vrdm564/50, and I can't find it on the web.
could you please send it to me at kevin.dicks@orange.fr
or just tell me how many steps per turn does this motor?

thank you and have a nice day =)

L_KyD

[iansurf]

Connections 1/2/3 are connected to an endswitch

[bpalvarenga]

Hi AlainB
I have a VRDM 564/50 which uses a BERGER LAHR LS 220450 00 01-G stepper motor card. This controller can be found in second hand shops in the internet.
Could you please send me the datasheet for the VRDM 564/50?
Thank you