Newbie- Hello

[bvdl75]

Hi to all I am new here and have serveral questions however I will use the serch and try to answer most of them before I post them.
I attended the Melbourne BBQ last week and met several members and had several questions answered already and I am off on quest now.
I have begun serching but have not found any on the following driver bords so I will limit myself to just the one question.
Has anybody had any experiance with these drivers and any feed back?

http://cgi.ebay.com.au/3-Axis-CNC-Ro...ayphotohosting

They are sold by the ebay user autohec

Thanks in advance for all your help.
Ben

[Amedeo Muscelli]

Hello,
I have bought one of these drivers, are easy to install and well constructed. The only problem if can be called in that manner is than the seller offer 2.5Amp as output, but my 282 Oz/inch motors than are rated 3Amp do not receive more of 0.6 and for that reason my small mill do not move beyond 240 mm/min. I am thinking to buy Geckco drives.
Amedeo