Hello everybody!I need help!

[itomo]

Hi
My English is not very good,but i will try to explain the problem that i have whit my mill machine.I am (very) new in cnc and before 2 months i buy a conventional machine and converted it to CNC whit Mach 3, controller and stepper motors from Kelling technology . When cutting a wax part,on every level of Z axis the part displaced in one direction on Y axes.I am not sure that is good explain and send a drawing .

[sergizmo]

So, whenever you make a move in Z it moves Y automatically as well? Sounds like a driver, controller or software problem. What control software are you using? You may want to look into hardware and wiring first, then look into control software if this doesn't solve the problem.

Keling has there own forum here: http://www.cnczone.com/forums/automation_technology_products/

There is also a general stepper motors and drivers forum: http://www.cnczone.com/forums/stepper_motors_drives/

You could also go into the appropriate control forum and ask there. They have ones for Mach:http://www.cnczone.com/forums/mach_software_artsoft_software/
EMC:http://www.cnczone.com/forums/linuxcnc_formerly_emc2/

Along with several others.

Good luck,
Serge