Need Help!- How to connect 3A Bi-Polar Stepper Motor Driver from arceurotrade

[cor]

I need help I bought these drivers by arceurotrade http://www.arceurotrade.co.uk/Catalogue/Stepper-Motors

But in the datasheet is only explained how to connect the steppers
and not the drivers to the printerport Iasked them but they dont want to give the information. anybody knows how to connect them to the printerport
COM PULSE DIR FREE
I am using mach 3 and ihave these steppers 1,9 Nm CNC Schrittmotor -1,8° / 2,8 A

Technische Daten

Haltemoment : 1,9 Nm bipolar - 4 Anschlusskabel
Phasenstrom : 2,8 A / 3,2 V
Schrittwinkel : 1,8°
Maße:B=57mm, H=57mm, L=76mm,

I am planning to built a mechmate http://www.mechmate.com/forums/index.php

[jalessi]

Hi,

You need a breakout board, several are availible.

This is a nice unit that will work for you.

See the link below.

http://campbelldesigns.net/breakout-board.php

Jeff Alessi

[jalessi]

These are also nice and less money!

http://tinyurl.com/35af6o