Are mice cables OK for limit switches?

[artwood_decor]

I have 4 separate axis controllers from Probotix
http://www.probotix.com/stepper_motor_drivers/SideStep/
I suppose the limit switches don't carry a lot of current, they only carry a signal. Am I correct? Please advice.
I intend to use recovered cables from computer mice as they are very flexible.
Does anybody have a schematic on how to connect the limit switches on the breakout
http://www.probotix.com/breakout_boa...eakout_board/?

Seems to me that LEN from Probotix is on vacation as he didn't answer my e-mails.

Thanks for any advice.
Lucian

[acondit]

Lucian,

You are correct that the limit switches don't carry a lot of current and mouse cables are pretty flexible. I thought about using some but when I looked at how small the wires were I decided the risk of breakage was to high for my liking. Think about how you will connect them to the breakout board.

Alan

[dewme5]

just make sure to stress relieve. No portion of the cable, or movement should be taken at the connections.