Mardus-Kreutz unipolar microstepper PCB, 80V -8 Amps

[kreutz]

I am planning to re-order more Mardus-Kreutz PCBs Rev2.1d from the fab, and need a minimum of 12 pcbs on the order. If anybody is interested into join the pool, let me know (PM) within a week from now. This is a no-profit no loss offer, bare board costs are $12.50 each + shipping.

[micro.business]

Hi,

I want to buy 12pcbs. Let me know how I can pay. I have motors Pennmotion steppers. Please tell me can I drive them with you electronics. Link is http://www.pennmotion.com/pdf/stp_bulletin.pdf, motor is 0430.

Thanks in advance.

[kreutz]

Originally Posted by micro.business Hi, I want to buy 12pcbs. Let me know how I can pay. I have motors Pennmotion steppers. Please tell me can I drive them with you electronics. Link is http://www.pennmotion.com/pdf/stp_bulletin.pdf, motor is 0430. Thanks in advance.

Yes, those motors will work fine with the Mardus-Kreutz boards. Remember that the translators must be assembled on a different board (not included), as shown on the photo. The boards are not populated (no components), just bare boards.

Please, PM me with your e-mail address for more details.

Thanks,

Kreutz.

[kreutz]

If there is enough interest on the translator boards, we could place an order for them too. They will be Rev01G (with two SMD 2N7002 (Sot-23) already soldered on the copper side), the estimated individual cost is $8.50 each + shipping, That is, if we get enough demand for an order of 50 boards (No profit-No loss here either).

Thanks,

Kreutz.

[kreutz]

THE OFFER IS CLOSED

Thanks for your support.

Kreutz.