| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Stepper Motors and Drives Discuss stepper motors, drivers and related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-29-2006, 09:35 PM
| |||
| |||
Hi - Just got three LJ III steppers from *bay, good price, quick delivery. These come with some heavy guage wires to a good connector. Since I will be making a drive board for these, if possible, I would like to use these connectors as is. Does anyone know the part number for the correct mating piece? Would Alltronics have some? Thanks John  |
|
#2
12-30-2006, 10:06 AM
| ||||
| ||||
| SpeakerGuy, I think that everyone who is using the HPLJ-II/III series stepper motors (myself included) has found it easier and less expensive to cut the original connector off and use a standard Molex connector. Even the local Radio Shack stores usually carry the 6-Position Male & 6-Position Female Interlocking Connectors. I hope this helps... BTW, just curious, how much did you shell out for the 3 HPLJ-III motors (with and without shipping/handling)?
__________________ HayTay Don't be the one that stands in the way of your success! |
|
#3
12-30-2006, 12:35 PM
| |||
| |||
I "bought it now" for $22.50 US, with $8.50 shipping. Not a killer deal, but definitely a good value for three steppers. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
