| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Stepper Motors and Drives Discuss stepper motors, drivers and related topics here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-27-2006, 05:53 PM
| |||
| |||
Hi, I bought the hobbycnc controler V4.XX from hobbycnc.hu had 3 stepper 200oz power supply 50VDC, 3axis when i put everything in, the motor is charge (doesn't move, but i feel the fields have voltage (50VDC). I try PMW (hobby manager) to make the motor turn but nothing. try all protocole H3BC, H378, etc.. also did COXtestdriver from mach 2 and mach 3, reboot still can't manage to turn the fields. Can someone please help  |
|
#2
12-27-2006, 05:59 PM
| ||||
| ||||
| Could be that the outright maximum recommended voltage for those boards is 44 volts DC, and the manufacturer doesn't recommend anything over 40.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) "If the women don't find you handsome, they should at least find you handy" -RedGreen show. |
|
#3
12-27-2006, 06:05 PM
| |||
| |||
|
|
#4
12-27-2006, 06:15 PM
| ||||
| ||||
| Nevermind my ignorance, I thought you were referring to Hobbycnc.com, which is what this forum is for. Was not aware that there was a Hobbycnc.hu My apologies.
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) "If the women don't find you handsome, they should at least find you handy" -RedGreen show. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
