Wich Driver For BERGER LAHR

[cor]

I have seen very nice motors but I don't know what type of driver I need
can somebody help me.

This was written on the motors

IN 2.25A 32
6 NM P 50
50-100 STA Encoder

[unterhaus]

that's not nearly enough info. This company has made some nice motors, but they go their own way a lot, such as making 5 phase steppers and the like. Need to tell us some more info about the motors.

[mcpltd]

They make a lot of three phase motors, so you will need to look atthe datasheet, or post the part number.

If it is a two or three phase motor then we can help you.

I have seen very nice motors but I don't know what type of driver I need
can somebody help me.

This was written on the motors

IN 2.25A 32
6 NM P 50
50-100 STA Encoder

[cor]

this is all the information of the motors what I could find


24 volt
IN 2.25A
3 phase
6 NM P 50
50-100 STA Encoder

[mcpltd]

That is not enough info to go by, but if you can find out the part number, that would clear things up.
The part number if it is a three phase stepper motor would look like VRDM3913.
If it is the 3913 and the voltage is 24V then we can offer a driver, and this is the link to it.
Check the voltage because the voltage is normally higher.


http://motioncontrolproducts.co.uk/p...products_id/92

this is all the information of the motors what I could find

24 volt
IN 2.25A
3 phase
6 NM P 50
50-100 STA Encoder

[cor]

I have the typenumbers
I called the man who is selling and he gave them to me
It is to far too have a look for myself aubout 80km
I think the price is not to much they are 45 euro
ex vat
He got other motors and he is looking what type they are
when I know this I'll post it

Two motors Berger lahr have the number VRDM3913/50LWC
One motor Berger lahr has the number VRDM31122/50LWC

[mcpltd]

It looks like both of those motors are rated at 325V
The VRDM31122/50LWC is a nema 42 (110 MM square) and 16Nm.

I have the typenumbers
I called the man who is selling and he gave them to me
It is to far too have a look for myself aubout 80km
I think the price is not to much they are 45 euro
ex vat
He got other motors and he is looking what type they are
when I know this I'll post it

Two motors Berger lahr have the number VRDM3913/50LWC
One motor Berger lahr has the number VRDM31122/50LWC

[gotis]

I have the typenumbers
I called the man who is selling and he gave them to me
It is to far too have a look for myself aubout 80km
I think the price is not to much they are 45 euro
ex vat
He got other motors and he is looking what type they are
when I know this I'll post it

Two motors Berger lahr have the number VRDM3913/50LWC
One motor Berger lahr has the number VRDM31122/50LWC

Just wondering if you still have these motors?
I have the drivers but no motors.

[cor]

No I dont Have them Anymore
Here is the website from the company
at that time he asked 45 euro without tax a piece

maybe he has some you can ask him

http://www.adr-spierings.nl/machineh...ontactmach.htm