Step-Syn Stepping Motors Sanyo Denki

[Shanghyd]

Hi all,
I have the opportunity to buy a StepSyn 103H7123-1740 stepper motor that is within my price range.

The specs are as follows:
SANYO DENKI STEP-SYN STEPPING MOTOR

4 AMPS DC

1.8 DEGREES PER REVOLUTION

NEMA 23

1/4" X 3/4" SHAFT

4 WIRE BIPOLAR

0.33 OHMS

1.3 VOLTS

I currently have 2 StepSyn motors with the numbers 103H7123-1742
I would like to have 3 matched motors.

Is the motor I have the opportunity to buy a close enough match to the two I have now? I don't have the exact specs on the motors I have.

I read somewhere the the part numbers change based on the use of the motors (for this manufacturer).
Thanks in advance for the help.

[mza_pakistani]

مجھے اس موٹر کے بارے میں بتائیں کہ یہ ایک بار کھول لینے کے بعد چلتی کیوں نہیں۔