LinkBack URL
About LinkBacks
What type and size machine? The first ones are probably a little small, the second ones (5 phase) are useless. The third depends on what type and size machine.
| | |
Im starting to search for motors for my CNC. Im using 8020 and their linear teflon bearings. I know im going to need a motor that is fairly strong...Please give opinions on these 3 so I can have a general idea on what to look for.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
What type and size machine? The first ones are probably a little small, the second ones (5 phase) are useless. The third depends on what type and size machine.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
You can get automation direct motors (276 oz/in) for about $39 + shipping.
Its going to be a 24 x 24 table used mostly for cuting hardwoods and acrylic.
Posting Permissions
| | |
