quick help

[linkintiger]

help me out i burn my brand new board ( it didn't work from the beginning
.....this is my setup.....

Nema 23 Stepper Motor 270oz-in,3A +3 Axis Board CNC Kit - eBay (item 280616213798 end time Mar-15-11 01:00:59 PDT)

what will best alternative 3 axis board for my setup just plug in and play

www.easy-cnc.com * Your best option in driver boards for CNC machines

Xylotex 3 Axis Stepper Motor Drive Board

or maybe different one or i should buy 4 axis board and connect 3 ports only?

i don't wanna waste my money on one more Tb6560 because too many people have problems with it.

[jschmitt]

Your motors say it needs 3 amps and both boards are only 2.5 amps. you can set the current to 2.5, but you will lose torque.

I didnot want to spend much on stepper drivers, but have found that you really don't want to cut corners there.

[linkintiger]

so which board on the market right now will work with my motors? except toshiba tb6560

[leaveme]

answer is geco540.
but you need a lot of investment.

[linkintiger]

any other cheaper alternative?