4wire stepper

[varunalau]

Interfacing HP scanner stepper motor

how can I interface a ULN2003 with STH-39D1126(4-wire stepper ) to parallel port ?

[azskies200]

A couple of useful links...scroll down for some info about 4 wire stepper and 4 wire stepper using only 2 wires to control...

Stepper Motors | code, circuits, & construction

Basic tutorial on using the parallel port to control steppers, 4 wires included..

Stepper Controller

[paul3112]

uln2003

[mcgyver2]

One thing I have learned about using the parallel port, especially with a machine that uses Windows, is that the program needs to be running before the power is turned ON to your system. The operating system polls the parallel port on start-up and may change the state of the port in ways that are not compatible with your system. Once your program is in control, then you can power up.

[wilfredtak]

find application datasheet of L297 AND L298 stepperdrivers for 4-wire bidirectional steering. Elektor also made a very good pcb in 1999...I use 'em for all my steppers (combination of L297 & L6203)

[mcgyver2]

Here is a controller that uses some switches to manually set some of the parameters. These can be changed to operate using the parallel port.
Tim