Need Help! chineese 6560 4 axis cnc control board issues


Results 1 to 4 of 4

Thread: chineese 6560 4 axis cnc control board issues

  1. #1
    Registered
    Join Date
    Jan 2016
    Location
    United States
    Posts
    5
    Downloads
    3
    Uploads
    0

    Default chineese 6560 4 axis cnc control board issues

    Hello, Everyone..
    I purchased the longs Chinese
    4 axis cnc kit with nema 23 steppers and the 6560 board and power supply which only goes down to 19 volts. After obtaining what information I could on my own due to their lack of documentation I started to build the electronics. I have everything hooked up but the steppers don't respond. I noticed the information I did get from them stated that I need to run this on a pc with Windows XP. Well Mach 3 is what I'm running. First. I would like to know what I need to do to make it work with Win 7 if I can. Will it work on XP mode in Win 7? Second. Can anyone give me the correct Mach 3 configuration for this board? There are allot of different information in these threads and its all great but can be overwhelming. Any info from you guys would be great. I'd like to keep it simple as I can just to get it going than approach the modifications from there on. Thank you all in advance.
    Troy

    Similar Threads:
    Last edited by Warhawk; 02-11-2018 at 02:51 PM.


  2. #2
    Registered
    Join Date
    Dec 2017
    Location
    United States
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: chineese 6560 4 axis cnc control board issues

    I can startup and wiring your parts.

    contact by my email

    mattcnc@protonmail.com



  3. #3
    Registered
    Join Date
    Jan 2016
    Location
    United States
    Posts
    5
    Downloads
    3
    Uploads
    0

    Default

    Here’s what I’ve got so far. XP Pro with service pack 3 on the way as well.

    Attached Thumbnails Attached Thumbnails chineese 6560 4 axis cnc control board issues-b221c93d-48d8-4fef-84be-e783417c5173-jpg  


  4. #4
    Registered
    Join Date
    Jan 2016
    Location
    United States
    Posts
    5
    Downloads
    3
    Uploads
    0

    Default

    Quote Originally Posted by mattcnc123 View Post
    I can startup and wiring your parts.

    contact by my email

    mattcnc@protonmail.com
    I sent it to you. Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

chineese 6560 4 axis cnc control board issues
chineese 6560 4 axis cnc control board issues