Need Help! Question for Stepper Motors Experts...


Results 1 to 7 of 7

Thread: Question for Stepper Motors Experts...

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Question Question for Stepper Motors Experts...

    Hi,

    I am upgrading my 4030z CNC machine EL Cheapo stepper drives (24V) to something more reliable Leadshine DM542E (driven at 48V) , genuine direct sale from Leadshine USA.

    I read that the high speed torque is better at 48V vs 24V.

    I couldn't find any specs (regarding this part number) beside what the seller gave me. He doesn't have more information than this.


    http://msn.elcouz.net/stepper_specs.png


    The leadshine DM542E drivers allow for multiple current settings... which one should I chose for my 3 axis steppers?

    Should I go with RMS or PEAK current setting? From the stepper motor part number I see 2.5A...


    http://www.cnczone.com/forums/attach...d=383598&stc=1


    Last question, does doubling the voltage will double the wattage? I feel this is a lot to dissipate for such small stepper motors. (from 2.5Ax24V to 2.5Ax48V)

    Thank you very much!

    Regards,
    Laurent

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Question for Stepper Motors Experts...-free-shipping-3pcs-leadshine-dm542-05-2-a  


  2. #2
    Registered greekart's Avatar
    Join Date
    Mar 2015
    Location
    Athens
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    RMS and Peak are kinda the same just the RMS is 70.7% of PEAK current value.

    My motors are 3.0A and use 36V and the 2.5A selection, not have to switch RMS/PEAK.

    This is how you calculate watts

    Watt = Volt × Amber



  3. #3
    Registered
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    Quote Originally Posted by greekart View Post
    RMS and Peak are kinda the same just the RMS is 70.7% of PEAK current value.

    My motors are 3.0A and use 36V and the 2.5A selection, not have to switch RMS/PEAK.

    This is how you calculate watts

    Watt = Volt × Amber
    Let me reformulate my question: Which current values are used in the part number (57BYGH76-2.5A) RMS or PEAK? I need to know what is the standard labeling on stepper motors to set the correct current value according to the table on the stepper driver.

    If I set the driver to 2.5A RMS does it mean it will cut-off at 2.5A? I am trying to figure out if the small stepper will really use 120 watts of power under load or this is just a limiter. I know stepper are not very efficient...120 watt of power is a lot to dissipate.



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    I am trying to figure out if the small stepper will really use 120 watts of power under load or this is just a limiter.
    Steppers don't work like regular motors, so you don't get anywhere near 120watts of power. The higher voltage is used to force the current through the motor faster, allowing it to have more torque at higher speeds.

    Set the drives to 2.5A peak.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Registered
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    What should be the safety margin power supply wise ?

    I have ordered a LRS-350-48 (48V 7.9A) thinking I should have at least 10A supply because 2.5A x 3 axis = 7.5A which is very close to the maximum current the PSU can supply.

    The PSU specs can allow 110-140% of rated power before faulting.


    Thank guys!



  6. #6
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    With modern drives, you only need about 70% of the total current, or 7.5 x 0.7, or about 5.25 amps from your power supply. So your 7.9 amp supply is fine.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Registered
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Question for Stepper Motors Experts...

    Quote Originally Posted by ger21 View Post
    With modern drives, you only need about 70% of the total current, or 7.5 x 0.7, or about 5.25 amps from your power supply. So your 7.9 amp supply is fine.
    Thank you for the fast and precise answers!!

    Have a nice day!

    Laurent



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Question for Stepper Motors Experts...

Question for Stepper Motors Experts...