I love this kind of scenario, modification, custom recalibration, you can post some photos of your hardware to let us see where you`re at.
I am new to the cnc world. Tring to put together a cnc mill but cant seam to get my motors up and running. C11G Breakout board,uc100 controller and Mach4. I'm having a hard time just getting my motors up and running. My wiring looks good. Wonder if it a software thing. HElPPPP!
Thanks
A Leaphart
Similar Threads:
- Build Thread- Software/Eletronics
- Mentor needed
- Need Help!- I need EXTREME help with 540 and Eletronics! Please!!!!!!
- mentor needed
I love this kind of scenario, modification, custom recalibration, you can post some photos of your hardware to let us see where you`re at.
Some schematics would be good to show how you have connected everything.
Hi
I can work with you online to setup your machine.
please email me mattcnc@protonmail.com and send me more information
about your wiring
- - - Updated - - -
Hi
I can work with you online to setup your machine.
please email me mattcnc@protonmail.com and send me more information
about your wiring
http://i563.photobucket.com/albums/s...ps9i49i4i8.jpg
http://i563.photobucket.com/albums/s...psk2f0kiv9.jpg
https://www.automationtechnologiesin...or-3-axis-kit/
I hope the link works. That's the kit I'm using. I changed out the c10 to c11G. Also using uc100 Controller with Mach4. Only light on C11g board is power? Both lights on the back of the uc100 are on and steady.
A Leaphart
http://www.cnczone.com/forums/attach...d=382252&stc=1
http://www.cnczone.com/forums/attach...d=382254&stc=1
Ok I think it`s a nice kit you got there, just assemble everything on the schematic provided and hook it up to a PC with a parallel port and that`s it, no flings no messing, tell us what`s your software used for this and PC set-up
First thing you need is to set-up your PC, (LPT port address on the BIOS, etc) what operating system you got? make sure the LPT port is detected properly on the windows environment.
G0704 Mill. Windows 10.
Don't think I did the LPT port Address. I have downloaded the software off UC100 Site.
A Leaphart
Last edited by Anthonyl; 12-24-2017 at 10:23 AM. Reason: Adding more info