Break out board with spindle control for use with a UC400ETH

[planeflier]

I have a Cnc Drive UC400ETH and looking to upgrade my breakout board. I have an older candcnc breakout board and would like to upgrade to something that has spindle control. What breakout boards is everyone using with the UC400ETH?

Similar Threads:

• G0704 stock spindle control board to mach 3 via C32 board.
• Need Help!- MACH3 SPINDLE CONTROL - CONTROL BOARD HELP
• Need Help!- Home switch for CNC 3020T- with a Spindle Control Board, JP-382A and JP-1482 Board
• Need Help!- interface CNC Break out board with VFD drive analog input for spindle control
• Break out board with mach3 for temp control

[arturod]

It all depends on what you want to do and the functions you need. A C11G or C10 boards would be good options:

https://cnc4pc.com/c11g-multifunction-cnc-board.html

https://cnc4pc.com/c10s-bi-direction...face-card.html

Arturo Duncan
http://cnc4pc.com