- Newbie- Stepper motor tuning & Mictosteps
-
Member
Stepper motor tuning & Mictosteps
Hi Friends,
I have started to make my first DIY CNC & I'm using
Driver card
http://www.ram-e-shop.com/ds/motor/XDL-42.pdf
Stepper motor
http://roboeq.ir/files/id/2664/name/57BYGH56-401A.pdf/
Pulley & Timinng belt
https://www.aliexpress.com/item/Free...311.0.0.DNBxzI
Software
Mach3
Now i'm stuck at motor tuning in mach3 & selecting Microstep in driver card anyhow I have configured those as follows
Driver card
Microstep = 8
Mach3
Steps per = 320
Velocity = 200
Acceleration = 100
step pulse & dir pulse = 5
are those configuration correct? or it should be changed?
Thanks in advance
Mirza
Similar Threads:
-
- Newbie- Stepper motor tuning & Mictosteps
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules