let us know how it goes. Sounds too good to be true!
Edit: found em for 14$
Just wondering if anyone here has picked up one of these m5256 drivers. I'm having trouble finding anything online about them other than links to purchase on eBay. I'll look harder when I get in tonight but I've came up with nothing on this forum either. The description states 20bit spi communication, stall detection w/estop, up to 8a, 40v, only 256MS and they are going for $11.00? I ordered a few for the hell of it, $22 shipped, just wondering if anyone else has taken a look at them
Similar Threads:
let us know how it goes. Sounds too good to be true!
Edit: found em for 14$
Luthier/Woodworker/Machinist in NS, Canada.
Link?
James hosts the single best wiki page about motors for CNC hobbyists on the net:
http://techref.massmind.org/techref/io/motors.htm Disagree? Tell him what's missing! ,o)
first result. Too little voltage for my needs
M5256 5A 256 Stepper Motor Driver Controller 42/57/86 Replace TB6560 TB6600 .. | eBay
Luthier/Woodworker/Machinist in NS, Canada.