Need Help! Mclennon stepper and driver


Results 1 to 2 of 2

Thread: Mclennon stepper and driver

  1. #1
    Registered
    Join Date
    Aug 2017
    Location
    Croatia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Mclennon stepper and driver

    Hello,

    I have stepper motor 34HSX-208 | McLennan Servo Supplies Unipolar Permanent Magnet Stepper Motor 1.8 and driver MSE570M | McLennan Servo Supplies 4 A Bipolar, Stepper Motor Stepper Drive, 5 ? 12V, 160 x 100 x 36mm | McLennan Servo Supplies

    I woul like to drive this motor with mach3 program over breakout board KK01 https://www.cnc4you.co.uk/Breakout%2...xis-with-Relay

    Can you help me with pins, which pins are going to KK01?

    http://www.cnczone.com/forums/attach...d=369914&stc=1

    I saw on youtube lot of videos that stepper driver have DIR+ DIR- PUL+ PUL+, but I have on my driver only one pin Direction (CW/CCW) and Step Pulse Input.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Mclennon stepper and driver-mse570m-png  


  2. #2
    Registered
    Join Date
    Aug 2017
    Location
    Croatia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Mclennon stepper and driver

    Anybody??



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mclennon stepper and driver

Mclennon stepper and driver